登录 立即注册
首页 > 绿虎论坛 > 电脑 > 讨论/求助 (发帖)

有玩esp32的吗？买了个板子上传项目老是出错不知道是不是接线问题

『回复列表(73|隐藏机器人聊天)』

60.

@童真再见，好的，以下是一个使用 MAX30102 模块和 ESP32 开发板获取心率和血氧数据的代码示例：

#include <Wire.h>
#include "MAX30105.h"
#include "heartRate.h"

MAX30105 particleSensor;

const byte RATE_SIZE = 4; //Increase this for more averaging. 4 is good.
byte rates[RATE_SIZE]; //Array of heart rates
byte rateSpot = 0;
long lastBeat = 0; //Time at which the last beat occurred

float beatsPerMinute;
int beatAvg;
int spo2;

void setup() {
  Serial.begin(115200);
  Wire.begin(21, 22); // SDA = GPIO 21, SCL = GPIO 22

  if (!particleSensor.begin(Wire, I2C_SPEED_FAST)) {
    Serial.println("MAX30105 was not found. Please check wiring/power. ");
    while (1);
  }

  particleSensor.setup();
  particleSensor.setPulseAmplitudeRed(0x0A);
  particleSensor.setPulseAmplitudeGreen(0);
}

void loop() {
  long irValue = particleSensor.getIR();
  int32_t redValue = particleSensor.getRed();

  if (checkForBeat(irValue) == true) {
    // We sensed a beat!
    long delta = millis() - lastBeat;
    lastBeat = millis();

    beatsPerMinute = 60 / (delta / 1000.0);

    if (beatsPerMinute < 255 && beatsPerMinute > 20) {
      rates[rateSpot++] = (byte)beatsPerMinute; //Store this reading in the array
      rateSpot %= RATE_SIZE; //Wrap variable

      //Take average of readings
      beatAvg = 0;
      for (byte x = 0 ; x < RATE_SIZE ; x++)
        beatAvg += rates[x];
      beatAvg /= RATE_SIZE;
    }
  }

  int32_t buffer[100]; //Buffer to store samples
  uint8_t spo2Valid;   //Indicator to show if the calculated SpO2 value is valid
  int8_t pulseWidth = 411; //The pulse width value that's optimized for finger measurement

  //Detect beats and calculate heart rate and SpO2
  int32_t spo2Value = particleSensor.getSpO2(buffer, 100, redValue, irValue, &spo2Valid, pulseWidth);
  if (spo2Valid) {
    spo2 = spo2Value;
  }

  Serial.print("IR=");
  Serial.print(irValue);
  Serial.print(", BPM=");
  Serial.print(beatsPerMinute);
  Serial.print(", Avg BPM=");
  Serial.print(beatAvg);
  Serial.print(", SpO2=");
  Serial.print(spo2);
  Serial.println();
}

这个代码通过 MAX30105 库和 heartRate 库来获取心率和血氧数据。代码初始化传感器，并使用 particleSensor.getIR() 和 particleSensor.getRed() 函数获取红外和红色信号值。然后，代码使用 checkForBeat() 函数检测心跳，如果检测到心跳，则计算心率和平均心率，并将其存储在 beatsPerMinute 和 beatAvg 变量中。

然后，代码使用 particleSensor.getSpO2() 函数获取血氧值，并将其存储在 spo2 变量中。注意，这个代码使用的是 `

(/@Ta/2023-04-01 03:21/样/源)
61.

@ChatGPT， int32_t spo2Value = particleSensor.getBloodOxygen(buffer, 100, redValue, irValue, &spo2Valid, pulseWidth);
if (spo2Valid) {
spo2 = spo2Value;
}这段报错怎么办C:\Users\Administrator\Desktop\esp32程序\30102\30102.ino: In function 'void loop()':
30102:58:38: error: 'class MAX30105' has no member named 'getBloodOxygen'

(/@Ta/2023-04-01 03:29/样/源)
62.

@童真再见，非常抱歉，我的错误。getBloodOxygen() 是 MAX30102 模块的函数，而不是 MAX30105 模块的函数。下面是一个更改后的代码示例：

#include <Wire.h>
#include "MAX30102.h"
#include "heartRate.h"

MAX30102 particleSensor;

const byte RATE_SIZE = 4; //Increase this for more averaging. 4 is good.
byte rates[RATE_SIZE]; //Array of heart rates
byte rateSpot = 0;
long lastBeat = 0; //Time at which the last beat occurred

float beatsPerMinute;
int beatAvg;
int spo2;

void setup() {
  Serial.begin(115200);
  Wire.begin(21, 22); // SDA = GPIO 21, SCL = GPIO 22

  if (!particleSensor.begin(Wire, I2C_SPEED_FAST)) {
    Serial.println("MAX30102 was not found. Please check wiring/power. ");
    while (1);
  }

  particleSensor.setup();
  particleSensor.setPulseAmplitudeRed(0x0A);
  particleSensor.setPulseAmplitudeGreen(0);
}

void loop() {
  long irValue = particleSensor.getIR();
  int32_t redValue = particleSensor.getRed();

  if (checkForBeat(irValue) == true) {
    // We sensed a beat!
    long delta = millis() - lastBeat;
    lastBeat = millis();

    beatsPerMinute = 60 / (delta / 1000.0);

    if (beatsPerMinute < 255 && beatsPerMinute > 20) {
      rates[rateSpot++] = (byte)beatsPerMinute; //Store this reading in the array
      rateSpot %= RATE_SIZE; //Wrap variable

      //Take average of readings
      beatAvg = 0;
      for (byte x = 0 ; x < RATE_SIZE ; x++)
        beatAvg += rates[x];
      beatAvg /= RATE_SIZE;
    }
  }

  int32_t buffer[100]; //Buffer to store samples
  uint8_t spo2Valid;   //Indicator to show if the calculated SpO2 value is valid
  int8_t pulseWidth = 411; //The pulse width value that's optimized for finger measurement

  //Detect beats and calculate heart rate and SpO2
  int32_t spo2Value = particleSensor.getBloodOxygen(buffer, 100, redValue, irValue, &spo2Valid, pulseWidth);
  if (spo2Valid) {
    spo2 = spo2Value;
  }

  Serial.print("IR=");
  Serial.print(irValue);
  Serial.print(", BPM=");
  Serial.print(beatsPerMinute);
  Serial.print(", Avg BPM=");
  Serial.print(beatAvg);
  Serial.print(", SpO2=");
  Serial.print(spo2);
  Serial.println();
}

请注意，代码中使用的是 MAX30102 库，而不是 MAX30105 库。我之前的代码示例中错误地使用了 MAX30105 库，这是我的错误。这个代码应该可以正常编译和运行了。

(/@Ta/2023-04-01 03:30/样/源)
63.

include <Wire.h>

include "MAX30105.h"

include "heartRate.h"

MAX30105 particleSensor;

const byte RATE_SIZE = 4; //Increase this for more averaging. 4 is good.
byte rates[RATE_SIZE]; //Array of heart rates
byte rateSpot = 0;
long lastBeat = 0; //Time at which the last beat occurred

float beatsPerMinute;
int beatAvg;

void setup()
{
Serial.begin(115200);
Serial.println("Initializing...");

// Initialize sensor
Wire.begin(4, 5); // SDA = GPIO 4, SCL = GPIO 5
if (!particleSensor.begin(Wire, I2C_SPEED_FAST)) //Use default I2C port, 400kHz speed
{
Serial.println("MAX30105 was not found. Please check wiring/power. ");
while (1);
}
Serial.println("Place your index finger on the sensor with steady pressure.");

particleSensor.setup(); //Configure sensor with default settings
particleSensor.setPulseAmplitudeRed(0x0A); //Turn Red LED to low to indicate sensor is running
particleSensor.setPulseAmplitudeGreen(0); //Turn off Green LED
}

void loop()
{
long irValue = particleSensor.getIR();

if (checkForBeat(irValue) == true)
{
//We sensed a beat!
long delta = millis() - lastBeat;
lastBeat = millis();

beatsPerMinute = 60 / (delta / 1000.0);

if (beatsPerMinute &lt; 255 && beatsPerMinute > 20)
{
  rates[rateSpot++] = (byte)beatsPerMinute; //Store this reading in the array
  rateSpot %= RATE_SIZE; //Wrap variable

  //Take average of readings
  beatAvg = 0;
  for (byte x = 0 ; x &lt; RATE_SIZE ; x++)
    beatAvg += rates[x];
  beatAvg /= RATE_SIZE;
}

}

Serial.print("IR=");
Serial.print(irValue);
Serial.print(", BPM=");
Serial.print(beatsPerMinute);
Serial.print(", Avg BPM=");
Serial.print(beatAvg);

if (irValue < 50000)
Serial.print(" No finger?");

Serial.println();
}@ChatGPT，在这个基础上加一个获取血氧

(/@Ta/2023-04-01 03:43/样/源)
64.

@童真再见，好的，这里是添加获取血氧的代码：

#include <Wire.h>
#include "MAX30105.h"
#include "heartRate.h"

MAX30105 particleSensor;

const byte RATE_SIZE = 4; //Increase this for more averaging. 4 is good.
byte rates[RATE_SIZE]; //Array of heart rates
byte rateSpot = 0;
long lastBeat = 0; //Time at which the last beat occurred

float beatsPerMinute;
int beatAvg;
int spo2;

void setup() {
  Serial.begin(115200);
  Wire.begin(4, 5); // SDA = GPIO 4, SCL = GPIO 5

  if (!particleSensor.begin(Wire, I2C_SPEED_FAST)) {
    Serial.println("MAX30105 was not found. Please check wiring/power. ");
    while (1);
  }

  particleSensor.setup();
  particleSensor.setPulseAmplitudeRed(0x0A);
  particleSensor.setPulseAmplitudeGreen(0);
}

void loop() {
  long irValue = particleSensor.getIR();

  if (checkForBeat(irValue) == true) {
    // We sensed a beat!
    long delta = millis() - lastBeat;
    lastBeat = millis();

    beatsPerMinute = 60 / (delta / 1000.0);

    if (beatsPerMinute < 255 && beatsPerMinute > 20) {
      rates[rateSpot++] = (byte)beatsPerMinute; //Store this reading in the array
      rateSpot %= RATE_SIZE; //Wrap variable

      //Take average of readings
      beatAvg = 0;
      for (byte x = 0 ; x < RATE_SIZE ; x++)
        beatAvg += rates[x];
      beatAvg /= RATE_SIZE;
    }
  }

  int32_t irValue = particleSensor.getIR();
  int32_t redValue = particleSensor.getRed();
  int32_t buffer[100]; //Buffer to store samples
  uint8_t spo2Valid;   //Indicator to show if the calculated SpO2 value is valid
  int8_t pulseWidth = 411; //The pulse width value that's optimized for finger measurement

  //Detect beats and calculate heart rate and SpO2
  int32_t spo2Value = particleSensor.getSpO2(buffer, 100, redValue, irValue, &spo2Valid, pulseWidth);
  if (spo2Valid) {
    spo2 = spo2Value;
  }

  Serial.print("IR=");
  Serial.print(irValue);
  Serial.print(", BPM=");
  Serial.print(beatsPerMinute);
  Serial.print(", Avg BPM=");
  Serial.print(beatAvg);
  Serial.print(", SpO2=");
  Serial.print(spo2);
  Serial.println();
}

请注意，在这个代码中，我们使用了 getSpO2() 函数来获取血氧饱和度，而不是 getBloodOxygen() 函数。同时，我们还需要添加一个 spo2 变量来存储血氧饱和度值。

(/@Ta/2023-04-01 03:44/样/源)
65.

include <Wire.h>

include "MAX30105.h"

include "spo2_algorithm.h"

include <WiFi.h> // 引入WiFi 库

// WiFi 参数
const char ssid = "64412";
const char password = "32323433";

WiFiServer server(80); // 在端口80上创建一个web服务器

MAX30105 particleSensor;

define MAX_BRIGHTNESS 255

if defined(AVR_ATmega328P) || defined(AVR_ATmega168)

//Arduino Uno不具备足够的SRAM来存储32位格式的50个红外LED数据和红色LED数据。
//为了解决这个问题，采样数据的16位MSB将被截断。样品变成16位数据。
uint16_t irBuffer[50]; //红外LED传感器数据
uint16_t redBuffer[50]; //红色LED传感器数据

else

uint32_t irBuffer[50]; //红外LED传感器数据
uint32_t redBuffer[50]; //红色LED传感器数据

endif

int32_t spo2; //SPO2值
int8_t validSPO2; //指示SPO2计算是否有效
int32_t heartRate; //心率值
int8_t validHeartRate; //指示心率计算是否有效

bool sensorEnabled = false; //标志位，表示传感器是否启用

void setup()
{
Serial.begin(115200); // 以115200比特/秒初始化串行通信：

// 初始化WIFI连接
Serial.println();
Serial.println();
Serial.print("连接到 ");
Serial.println(ssid);
WiFi.begin(ssid, password);

while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.print(".");
}

Serial.println("");
Serial.println("WiFi 连接成功");
Serial.println(WiFi.localIP());

// 初始化Web服务器
server.begin();
Serial.println("Web服务器已启动");

// 初始化传感器
Wire.begin(4, 5); // SDA = GPIO 4, SCL = GPIO 5
if (!particleSensor.begin(Wire, I2C_SPEED_FAST)) //使用默认的I2C端口，400kHz的速度
{
Serial.println(F("未找到MAX30105。 请检查布线/电源。"));
while (1);
}

particleSensor.setup(55, 4, 2, 200, 411, 4096); //使用这些设置配置传感器

// 初始化结束后关闭传感器模块
particleSensor.shutDown();
sensorEnabled = false;
}

long lastActiveTime = 0;

void loop()
{
// 等待Web客户端连接
WiFiClient client = server.available();
if (client) {
Serial.println("New Client.");
String currentLine = "";
while (client.connected()) {
if (client.available()) {
char c = client.read();
Serial.write(c);
if (c == '\n') {
if (currentLine.length() == 0) {
// 发送HTTP头部
client.println("HTTP/1.1 200 OK");
client.println("Content-type:text/html");
client.println();

        // 发送HTML内容
        client.println("&lt;html>");
        client.println("&lt;head>&lt;title>MAX30102 控制&lt;/title>&lt;/head>");
        client.println("&lt;body>");
        client.println("&lt;h1>MAX30102 控制&lt;/h1>");
        client.println("&lt;p>当前状态: " + String(sensorEnabled ? "已打开" : "已关闭") + "&lt;/p>");
        client.println("&lt;form method=\"POST\">");
        if (sensorEnabled) {
          client.println("&lt;input type=\"submit\" name=\"action\" value=\"关闭传感器\"/>");
        } else {
          client.println("&lt;input type=\"submit\" name=\"action\" value=\"打开传感器\"/>");
        }
        client.println("&lt;/form>");
        client.println("&lt;/body>");
        client.println("&lt;/html>");

        // 处理命令
        if (currentLine.indexOf("GET /?action=打开传感器") != -1) {
          if (!sensorEnabled) {
            // 打开传感器模块
            particleSensor.wakeUp();
            delay(500); // 给传感器启动一些时间
            sensorEnabled = true;
          }
        } else if (currentLine.indexOf("GET /?action=关闭传感器") != -1) {
          if (sensorEnabled) {
            // 关闭传感器模块
            particleSensor.shutDown();
            sensorEnabled = false;
          }
        }

        break;
      } else {
        currentLine = "";
      }
    } else if (c != '\r') {
      currentLine += c;
    }
  }
}

// 断开连接
client.stop();
Serial.println("Client Disconnected.");

}

// 检查传感器是否需要关闭
if (sensorEnabled && (millis() - lastActiveTime > 60000)) {
particleSensor.shutDown();
sensorEnabled = false;
}

//读取前50个样本，并确定信号范围
for (byte i = 0 ; i < 50 ; i++)
{
while (particleSensor.available() == false) //是否有新数据？
particleSensor.check(); //检查传感器是否有新数据

redBuffer<span style="font-style:italic"> = particleSensor.getRed();
irBuffer<span style="font-style:italic"> = particleSensor.getIR();
particleSensor.nextSample(); //处理完当前样本后，转到下一个样本
Serial.print(F("红光="));
Serial.print(redBuffer<span style="font-style:italic">, DEC);
Serial.print(F(", 红外="));
Serial.println(irBuffer<span style="font-style:italic">, DEC);

}

//在前50个样本之后计算心率和SpO2（前4秒的样本）
maxim_heart_rate_and_oxygen_saturation(irBuffer, 50, redBuffer, &spo2, &validSPO2, &heartRate, &validHeartRate);

//无线循环地从MAX30102中采样。每1秒计算一次心率和SpO2
while (1)
{
//将内存中的前25个样本丢弃，并将最后25个样本移动到顶部
for (byte i = 25; i < 50; i++)
{
redBuffer[i - 25] = redBuffer;
irBuffer[i - 25] = irBuffer;
}

//在计算心率之前，采取25个样本集。
for (byte i = 25; i &lt; 50; i++)
{
  while (particleSensor.available() == false) //是否有新数据？
    particleSensor.check(); //检查传感器是否有新数据

  redBuffer<span style="font-style:italic"> = particleSensor.getRed();
  irBuffer<span style="font-style:italic"> = particleSensor.getIR();
  particleSensor.nextSample(); //处理完当前样本后，转到下一个样本
  Serial.print(F("红光="));
  Serial.print(redBuffer<span style="font-style:italic">, DEC);
  Serial.print(F(", 红外="));
  Serial.print(irBuffer<span style="font-style:italic">, DEC);

  Serial.print(F(", 心率="));
  Serial.print(heartRate, DEC);

  Serial.print(F(", HRvalid="));
  Serial.print(validHeartRate, DEC);

  Serial.print(F(", 血氧饱和度="));
  Serial.print(spo2, DEC);

  Serial.print(F(", SPO2Valid="));
  Serial.println(validSPO2, DEC);

}

//收集25个新样本后，重新计算HR和SP02
maxim_heart_rate_and_oxygen_saturation(irBuffer, 50, redBuffer, &spo2, &validSPO2, &heartRate, &validHeartRate);
printToSerial();

}
}

void printToSerial() {
if(validSPO2 && validHeartRate) {
Serial.print(F("心率: ")); Serial.println(heartRate, DEC);
Serial.print(F("血氧饱和度: ")); Serial.println(spo2, DEC);
} else {
Serial.println(F("无效"));
}
}

// 如果需要关闭传感器模块，则可以使用以下函数
void shutDownSensorModule() {
if (sensorEnabled) {
particleSensor.shutDown();
sensorEnabled = false;
}
}
这段代码中Web服务器，传感器的采样和计算代码在一个无限循环中会崩溃，帮我修改一下
手机

(/@Ta/2023-04-01 13:39/样/源)
66.

include <Wire.h>

include "MAX30105.h"

include "spo2_algorithm.h"

include <WiFi.h> // 引入WiFi 库

// WiFi 参数
const char ssid = "64412";
const char password = "32323433";

WiFiServer server(80); // 在端口80上创建一个web服务器

MAX30105 particleSensor;

define MAX_BRIGHTNESS 255

if defined(AVR_ATmega328P) || defined(AVR_ATmega168)

//Arduino Uno不具备足够的SRAM来存储32位格式的50个红外LED数据和红色LED数据。
//为了解决这个问题，采样数据的16位MSB将被截断。样品变成16位数据。
uint16_t irBuffer[50]; //红外LED传感器数据
uint16_t redBuffer[50]; //红色LED传感器数据

else

uint32_t irBuffer[50]; //红外LED传感器数据
uint32_t redBuffer[50]; //红色LED传感器数据

endif

int32_t spo2; //SPO2值
int8_t validSPO2; //指示SPO2计算是否有效
int32_t heartRate; //心率值
int8_t validHeartRate; //指示心率计算是否有效

bool sensorEnabled = false; //标志位，表示传感器是否启用

void setup()
{
Serial.begin(115200); // 以115200比特/秒初始化串行通信：

// 初始化WIFI连接
Serial.println();
Serial.println();
Serial.print("连接到 ");
Serial.println(ssid);
WiFi.begin(ssid, password);

while (WiFi.status() != WL_CONNECTED) {
delay(1000);
Serial.print(".");
}

Serial.println("");
Serial.println("WiFi 连接成功");
Serial.println(WiFi.localIP());

// 初始化Web服务器
server.begin();
Serial.println("Web服务器已启动");

// 初始化传感器
Wire.begin(4, 5); // SDA = GPIO 4, SCL = GPIO 5
if (!particleSensor.begin(Wire, I2C_SPEED_FAST)) //使用默认的I2C端口，400kHz的速度
{
Serial.println(F("未找到MAX30105。 请检查布线/电源。"));
while (1);
}

particleSensor.setup(55, 4, 2, 200, 411, 4096); //使用这些设置配置传感器

// 初始化结束后关闭传感器模块
particleSensor.shutDown();
sensorEnabled = false;
}

long lastActiveTime = 0;

void loop()
{
// 等待Web客户端连接
WiFiClient client = server.available();
if (client) {
Serial.println("New Client.");
String currentLine = "";
while (client.connected()) {
if (client.available()) {
char c = client.read();
Serial.write(c);
if (c == '\n') {
if (currentLine.length() == 0) {
// 发送HTTP头部
client.println("HTTP/1.1 200 OK");
client.println("Content-type:text/html");
client.println();

        // 发送HTML内容
        client.println("&lt;html>");
        client.println("&lt;head>&lt;title>MAX30102 控制&lt;/title>&lt;/head>");
        client.println("&lt;body>");
        client.println("&lt;h1>MAX30102 控制&lt;/h1>");
        client.println("&lt;p>当前状态: " + String(sensorEnabled ? "已打开" : "已关闭") + "&lt;/p>");
        client.println("&lt;form method=\"POST\">");
        if (sensorEnabled) {
          client.println("&lt;input type=\"submit\" name=\"action\" value=\"关闭传感器\"/>");
        } else {
          client.println("&lt;input type=\"submit\" name=\"action\" value=\"打开传感器\"/>");
        }
        client.println("&lt;/form>");
        client.println("&lt;/body>");
        client.println("&lt;/html>");

        // 处理命令
        if (currentLine.indexOf("GET /?action=打开传感器") != -1) {
          if (!sensorEnabled) {
            // 打开传感器模块
            particleSensor.wakeUp();
            delay(500); // 给传感器启动一些时间
            sensorEnabled = true;
          }
        } else if (currentLine.indexOf("GET /?action=关闭传感器") != -1) {
          if (sensorEnabled) {
            // 关闭传感器模块
            particleSensor.shutDown();
            sensorEnabled = false;
          }
        }

        break;
      } else {
        currentLine = "";
      }
    } else if (c != '\r') {
      currentLine += c;
    }
  }
}

// 断开连接
client.stop();
Serial.println("Client Disconnected.");

}

// 检查传感器是否需要关闭
if (sensorEnabled && (millis() - lastActiveTime > 60000)) {
particleSensor.shutDown();
sensorEnabled = false;
}

//读取前50个样本，并确定信号范围
for (byte i = 0 ; i < 50 ; i++)
{
while (particleSensor.available() == false) //是否有新数据？
particleSensor.check(); //检查传感器是否有新数据

redBuffer<span style="font-style:italic"> = particleSensor.getRed();
irBuffer<span style="font-style:italic"> = particleSensor.getIR();
particleSensor.nextSample(); //处理完当前样本后，转到下一个样本
Serial.print(F("红光="));
Serial.print(redBuffer<span style="font-style:italic">, DEC);
Serial.print(F(", 红外="));
Serial.println(irBuffer<span style="font-style:italic">, DEC);

}

//在前50个样本之后计算心率和SpO2（前4秒的样本）
maxim_heart_rate_and_oxygen_saturation(irBuffer, 50, redBuffer, &spo2, &validSPO2, &heartRate, &validHeartRate);

//无线循环地从MAX30102中采样。每1秒计算一次心率和SpO2
while (1)
{
//将内存中的前25个样本丢弃，并将最后25个样本移动到顶部
for (byte i = 25; i < 50; i++)
{
redBuffer[i - 25] = redBuffer;
irBuffer[i - 25] = irBuffer;
}

//在计算心率之前，采取25个样本集。
for (byte i = 25; i &lt; 50; i++)
{
  while (particleSensor.available() == false) //是否有新数据？
    particleSensor.check(); //检查传感器是否有新数据

  redBuffer<span style="font-style:italic"> = particleSensor.getRed();
  irBuffer<span style="font-style:italic"> = particleSensor.getIR();
  particleSensor.nextSample(); //处理完当前样本后，转到下一个样本
  Serial.print(F("红光="));
  Serial.print(redBuffer<span style="font-style:italic">, DEC);
  Serial.print(F(", 红外="));
  Serial.print(irBuffer<span style="font-style:italic">, DEC);

  Serial.print(F(", 心率="));
  Serial.print(heartRate, DEC);

  Serial.print(F(", HRvalid="));
  Serial.print(validHeartRate, DEC);

  Serial.print(F(", 血氧饱和度="));
  Serial.print(spo2, DEC);

  Serial.print(F(", SPO2Valid="));
  Serial.println(validSPO2, DEC);

}

//收集25个新样本后，重新计算HR和SP02
maxim_heart_rate_and_oxygen_saturation(irBuffer, 50, redBuffer, &spo2, &validSPO2, &heartRate, &validHeartRate);
printToSerial();

}
}

void printToSerial() {
if(validSPO2 && validHeartRate) {
Serial.print(F("心率: ")); Serial.println(heartRate, DEC);
Serial.print(F("血氧饱和度: ")); Serial.println(spo2, DEC);
} else {
Serial.println(F("无效"));
}
}

// 如果需要关闭传感器模块，则可以使用以下函数
void shutDownSensorModule() {
if (sensorEnabled) {
particleSensor.shutDown();
sensorEnabled = false;
}
}
@ChatGPT，这段代码中Web服务器，传感器的采样和计算代码在一个无限循环中会崩溃，帮我修改一下

(/@Ta/2023-04-01 13:41/样/源)
67.

include <Wire.h> #include "MAX30105.h" #include "spo2_algorithm.h" #include <WiFi.h> // 引入WiFi 库 // WiFi 参数 const char ssid = "623"; const char password = "88888623"; WiFiServer server(80); // 在端口80上创建一个web服务器 MAX30105 particleSensor; #define MAX_BRIGHTNESS 255 #if defined(AVR_ATmega328P) || defined(AVR_ATmega168) //Arduino Uno不具备足够的SRAM来存储32位格式的50个红外LED数据和红色LED数据。 //为了解决这个问题，采样数据的16位MSB将被截断。样品变成16位数据。 uint16_t irBuffer[50]; //红外LED传感器数据 uint16_t redBuffer[50]; //红色LED传感器数据 #else uint32_t irBuffer[50]; //红外LED传感器数据 uint32_t redBuffer[50]; //红色LED传感器数据 #endif int32_t spo2; //SPO2值 int8_t validSPO2; //指示SPO2计算是否有效 int32_t heartRate; //心率值 int8_t validHeartRate; //指示心率计算是否有效 bool sensorEnabled = false; //标志位，表示传感器是否启用 void setup() { Serial.begin(115200); // 以115200比特/秒初始化串行通信： // 初始化WIFI连接 Serial.println(); Serial.println(); Serial.print("连接到 "); Serial.println(ssid); WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(1000); Serial.print("."); } Serial.println(""); Serial.println("WiFi 连接成功"); Serial.println(WiFi.localIP()); // 初始化Web服务器 server.begin(); Serial.println("Web服务器已启动"); // 初始化传感器 Wire.begin(4, 5); // SDA = GPIO 4, SCL = GPIO 5 if (!particleSensor.begin(Wire, I2C_SPEED_FAST)) //使用默认的I2C端口，400kHz的速度 { Serial.println(F("未找到MAX30105。 请检查布线/电源。")); while (1); } particleSensor.setup(55, 4, 2, 200, 411, 4096); //使用这些设置配置传感器 // 初始化结束后关闭传感器模块 particleSensor.shutDown(); sensorEnabled = false; } long lastActiveTime = 0; void loop() { // 等待Web客户端连接 WiFiClient client = server.available(); if (client) { Serial.println("New Client."); String currentLine = ""; while (client.connected()) { if (client.available()) { char c = client.read(); Serial.write(c); if (c == '\n') { if (currentLine.length() == 0) { // 发送HTTP头部 client.println("HTTP/1.1 200 OK"); client.println("Content-type:text/html"); client.println(); // 发送HTML内容 client.println("<html>"); client.println("<head><title>MAX30102 控制</title></head>"); client.println("<body>"); client.println("<h1>MAX30102 控制</h1>"); client.println("<p>当前状态: " + String(sensorEnabled ? "已打开" : "已关闭") + "</p>"); client.println("<form method=\"POST\">"); if (sensorEnabled) { client.println("<input type=\"submit\" name=\"action\" value=\"关闭传感器\"/>"); } else { client.println("<input type=\"submit\" name=\"action\" value=\"打开传感器\"/>"); } client.println("</form>"); client.println("</body>"); client.println("</html>"); // 处理命令 if (currentLine.indexOf("GET /?action=打开传感器") != -1) { if (!sensorEnabled) { // 打开传感器模块 particleSensor.wakeUp(); delay(500); // 给传感器启动一些时间 sensorEnabled = true; } } else if (currentLine.indexOf("GET /?action=关闭传感器") != -1) { if (sensorEnabled) { // 关闭传感器模块 particleSensor.shutDown(); sensorEnabled = false; } } break; } else { currentLine = ""; } } else if (c != '\r') { currentLine += c; } } } // 断开连接 client.stop(); Serial.println("Client Disconnected."); } // 检查传感器是否需要关闭 if (sensorEnabled && (millis() - lastActiveTime > 60000)) { particleSensor.shutDown(); sensorEnabled = false; } //读取前50个样本，并确定信号范围 for (byte i = 0 ; i < 50 ; i++) { while (particleSensor.available() == false) //是否有新数据？ particleSensor.check(); //检查传感器是否有新数据 redBuffer = particleSensor.getRed(); irBuffer = particleSensor.getIR(); particleSensor.nextSample(); //处理完当前样本后，转到下一个样本 Serial.print(F("红光=")); Serial.print(redBuffer, DEC); Serial.print(F(", 红外=")); Serial.println(irBuffer, DEC); } //在前50个样本之后计算心率和SpO2（前4秒的样本） maxim_heart_rate_and_oxygen_saturation(irBuffer, 50, redBuffer, &spo2, &validSPO2, &heartRate, &validHeartRate); //无线循环地从MAX30102中采样。每1秒计算一次心率和SpO2 while (1) { //将内存中的前25个样本丢弃，并将最后25个样本移动到顶部 for (byte i = 25; i < 50; i++) { redBuffer[i - 25] = redBuffer; irBuffer[i - 25] = irBuffer; } //在计算心率之前，采取25个样本集。 for (byte i = 25; i < 50; i++) { while (particleSensor.available() == false) //是否有新数据？ particleSensor.check(); //检查传感器是否有新数据 redBuffer = particleSensor.getRed(); irBuffer = particleSensor.getIR(); particleSensor.nextSample(); //处理完当前样本后，转到下一个样本 Serial.print(F("红光=")); Serial.print(redBuffer, DEC); Serial.print(F(", 红外=")); Serial.print(irBuffer, DEC); Serial.print(F(", 心率=")); Serial.print(heartRate, DEC); Serial.print(F(", HRvalid=")); Serial.print(validHeartRate, DEC); Serial.print(F(", 血氧饱和度=")); Serial.print(spo2, DEC); Serial.print(F(", SPO2Valid=")); Serial.println(validSPO2, DEC); } //收集25个新样本后，重新计算HR和SP02 maxim_heart_rate_and_oxygen_saturation(irBuffer, 50, redBuffer, &spo2, &validSPO2, &heartRate, &validHeartRate); printToSerial(); } } void printToSerial() { if(validSPO2 && validHeartRate) { Serial.print(F("心率: ")); Serial.println(heartRate, DEC); Serial.print(F("血氧饱和度: ")); Serial.println(spo2, DEC); } else { Serial.println(F("无效")); } } // 如果需要关闭传感器模块，则可以使用以下函数 void shutDownSensorModule() { if (sensorEnabled) { particleSensor.shutDown(); sensorEnabled = false; } }@Chatbot，这段代码中Web服务器，传感器的采样和计算代码在一个无限循环中会崩溃，帮我改一下

手机

(/@Ta/2023-04-01 13:54/样/源)
68.

[新会话] @童真再见，error, invalid character 'P' looking for beginning of value

(/@Ta/2023-04-01 13:55/样/源)
69.

[新会话] @童真再见，error, invalid character 'P' looking for beginning of value

(/@Ta/2023-04-01 13:55/样/源)
70.

include <Wire.h> #include "MAX30105.h" #include "spo2_algorithm.h" #include <WiFi.h> // 引入WiFi 库 // WiFi 参数 const char ssid = "623"; const char password = "88888623"; WiFiServer server(80); // 在端口80上创建一个web服务器 MAX30105 particleSensor; #define MAX_BRIGHTNESS 255 #if defined(AVR_ATmega328P) || defined(AVR_ATmega168) //Arduino Uno不具备足够的SRAM来存储32位格式的50个红外LED数据和红色LED数据。 //为了解决这个问题，采样数据的16位MSB将被截断。样品变成16位数据。 uint16_t irBuffer[50]; //红外LED传感器数据 uint16_t redBuffer[50]; //红色LED传感器数据 #else uint32_t irBuffer[50]; //红外LED传感器数据 uint32_t redBuffer[50]; //红色LED传感器数据 #endif int32_t spo2; //SPO2值 int8_t validSPO2; //指示SPO2计算是否有效 int32_t heartRate; //心率值 int8_t validHeartRate; //指示心率计算是否有效 bool sensorEnabled = false; //标志位，表示传感器是否启用 void setup() { Serial.begin(115200); // 以115200比特/秒初始化串行通信： // 初始化WIFI连接 Serial.println(); Serial.println(); Serial.print("连接到 "); Serial.println(ssid); WiFi.begin(ssid, password); while (WiFi.status() != WL_CONNECTED) { delay(1000); Serial.print("."); } Serial.println(""); Serial.println("WiFi 连接成功"); Serial.println(WiFi.localIP()); // 初始化Web服务器 server.begin(); Serial.println("Web服务器已启动"); // 初始化传感器 Wire.begin(4, 5); // SDA = GPIO 4, SCL = GPIO 5 if (!particleSensor.begin(Wire, I2C_SPEED_FAST)) //使用默认的I2C端口，400kHz的速度 { Serial.println(F("未找到MAX30105。 请检查布线/电源。")); while (1); } particleSensor.setup(55, 4, 2, 200, 411, 4096); //使用这些设置配置传感器 // 初始化结束后关闭传感器模块 particleSensor.shutDown(); sensorEnabled = false; } long lastActiveTime = 0; void loop() { // 等待Web客户端连接 WiFiClient client = server.available(); if (client) { Serial.println("New Client."); String currentLine = ""; while (client.connected()) { if (client.available()) { char c = client.read(); Serial.write(c); if (c == '\n') { if (currentLine.length() == 0) { // 发送HTTP头部 client.println("HTTP/1.1 200 OK"); client.println("Content-type:text/html"); client.println(); // 发送HTML内容 client.println("<html>"); client.println("<head><title>MAX30102 控制</title></head>"); client.println("<body>"); client.println("<h1>MAX30102 控制</h1>"); client.println("<p>当前状态: " + String(sensorEnabled ? "已打开" : "已关闭") + "</p>"); client.println("<form method=\"POST\">"); if (sensorEnabled) { client.println("<input type=\"submit\" name=\"action\" value=\"关闭传感器\"/>"); } else { client.println("<input type=\"submit\" name=\"action\" value=\"打开传感器\"/>"); } client.println("</form>"); client.println("</body>"); client.println("</html>"); // 处理命令 if (currentLine.indexOf("GET /?action=打开传感器") != -1) { if (!sensorEnabled) { // 打开传感器模块 particleSensor.wakeUp(); delay(500); // 给传感器启动一些时间 sensorEnabled = true; } } else if (currentLine.indexOf("GET /?action=关闭传感器") != -1) { if (sensorEnabled) { // 关闭传感器模块 particleSensor.shutDown(); sensorEnabled = false; } } break; } else { currentLine = ""; } } else if (c != '\r') { currentLine += c; } } } // 断开连接 client.stop(); Serial.println("Client Disconnected."); } // 检查传感器是否需要关闭 if (sensorEnabled && (millis() - lastActiveTime > 60000)) { particleSensor.shutDown(); sensorEnabled = false; } //读取前50个样本，并确定信号范围 for (byte i = 0 ; i < 50 ; i++) { while (particleSensor.available() == false) //是否有新数据？ particleSensor.check(); //检查传感器是否有新数据 redBuffer = particleSensor.getRed(); irBuffer = particleSensor.getIR(); particleSensor.nextSample(); //处理完当前样本后，转到下一个样本 Serial.print(F("红光=")); Serial.print(redBuffer, DEC); Serial.print(F(", 红外=")); Serial.println(irBuffer, DEC); } //在前50个样本之后计算心率和SpO2（前4秒的样本） maxim_heart_rate_and_oxygen_saturation(irBuffer, 50, redBuffer, &spo2, &validSPO2, &heartRate, &validHeartRate); //无线循环地从MAX30102中采样。每1秒计算一次心率和SpO2 while (1) { //将内存中的前25个样本丢弃，并将最后25个样本移动到顶部 for (byte i = 25; i < 50; i++) { redBuffer[i - 25] = redBuffer; irBuffer[i - 25] = irBuffer; } //在计算心率之前，采取25个样本集。 for (byte i = 25; i < 50; i++) { while (particleSensor.available() == false) //是否有新数据？ particleSensor.check(); //检查传感器是否有新数据 redBuffer = particleSensor.getRed(); irBuffer = particleSensor.getIR(); particleSensor.nextSample(); //处理完当前样本后，转到下一个样本 Serial.print(F("红光=")); Serial.print(redBuffer, DEC); Serial.print(F(", 红外=")); Serial.print(irBuffer, DEC); Serial.print(F(", 心率=")); Serial.print(heartRate, DEC); Serial.print(F(", HRvalid=")); Serial.print(validHeartRate, DEC); Serial.print(F(", 血氧饱和度=")); Serial.print(spo2, DEC); Serial.print(F(", SPO2Valid=")); Serial.println(validSPO2, DEC); } //收集25个新样本后，重新计算HR和SP02 maxim_heart_rate_and_oxygen_saturation(irBuffer, 50, redBuffer, &spo2, &validSPO2, &heartRate, &validHeartRate); printToSerial(); } } void printToSerial() { if(validSPO2 && validHeartRate) { Serial.print(F("心率: ")); Serial.println(heartRate, DEC); Serial.print(F("血氧饱和度: ")); Serial.println(spo2, DEC); } else { Serial.println(F("无效")); } } // 如果需要关闭传感器模块，则可以使用以下函数 void shutDownSensorModule() { if (sensorEnabled) { particleSensor.shutDown(); sensorEnabled = false; } }@hu60bot，这段代码中Web服务器，传感器的采样和计算代码在一个无限循环中会崩溃，帮我改一下
手机

(/@Ta/2023-04-01 14:01/样/源)
71.

[新会话] @童真再见，Post "https://api.openai.com/v1/chat/completions": dial tcp 192.168.31.16:443: i/o timeout

(/@Ta/2023-04-01 14:01/样/源)
72.

[新会话] @童真再见，这段代码存在多个问题，可能会导致程序崩溃或不正常工作。以下是一些问题及建议的修改：

  1. 在无限循环中读取50个样本，计算心率和SpO2之后，应该退出无限循环并等待一段时间才能再次读取样本和计算心率和SpO2。否则，程序将陷入死循环，无法响应其他操作。

  2. 在循环中，每次读取50个样本时都会重新分配内存，这会浪费内存资源，应该将红色和红外缓冲区的分配放在setup函数中。

  3. 在循环中，读取50个样本时，应该使用[]操作符访问数组中的元素，而不是访问整个数组。

  4. 在循环中，将新的样本插入缓冲区时，应该从下标25开始插入，而不是从0开始插入。

  5. 在循环中，打印输出语句的位置应该放在正确的位置，以便正确输出。

以下是修改后的代码：

(/@Ta/2023-04-01 15:24/样/源)
73.

[新会话] @童真再见，error, status code: 429, message: You exceeded your current quota, please check your plan and billing details.

(/@Ta/2023-04-01 20:50/样/源)
上一页 4/4页,共73楼
回复需要登录。

11月16日 14:50 星期六

本站由hu60wap6和华为CPU驱动

备案号: 京ICP备18041936号-1